思科3750根除暗码指令进程
思科3750根除暗码指令进程
1.启用超级终端并呈现联接界面
2.拔掉沟通机的电源。
3.按下沟通机上的Mode按钮,与此一同,从头插上沟通机的电源线。
4.当沟通机左面的sys灯会逐渐的闪耀,(仔细的话会发现有些灯赤色的闪过),按住mode按钮直到sys灯不闪耀(常亮情况)。不然提早松开的按钮的话会直接进入正常的主张,有必要跳回进程2从头操作
5.可以松开Mode按钮
往后体系将闪现一些指示信息:
The system has been interrupted prior to initializing the flash file system.The following
commands will initialize the flash file system, and finish loading theoperating system software:
flash_init /---初始化flash文件体系---/
load_helper /---加载帮忙文件---/
boot /---主张设备进入正常的办法---/
进程:
switch:
Switch:flash_init
Switch:dir flash: /---查看Flash的文件姓名可以用来供认文件名为config.text---/
Switch:rename flash:config.text flash:config.text.old /---把装备文件重命名,当然你可以不改为config.text.old,只需文件名和正本的纷歧样就可以---/
Switch:boot /---手动主张沟通机---/
因为装备文件改正了,所以沟通机找不到默许的config.text而呈现装备的对话导游,挑选n然后回车然后咱们就会绕过正本的password而进入到:
Switch>
Switch>en /--可以进入特权办法--/
Switch#rename flash:config.text.old flash:config.text /---康复沟通机装备文件---/
Switch#copy flash:config.text system:running-config /---保留装备到DRAM里---/
Switch#config t
Switch(config)#no enable password /---干掉特权办法旧暗码---/
Switch(config)#no enable secret /---干掉加秘暗码---/
Switch(config)#exit
Switch#copy run start /---把其服装备的文件写回Flash---/
用这个办法批改暗码不会把正本的装备文件内容清掉。分外是一个现成的大型网络里现已在作业的沟通机,这么比照稳妥!
上一篇:电位
下一篇:光缆受压或开裂缺陷处理办法